Heavy-Duty PP Caster

 

Heavy Duty PP Caster Side Brake

Brand: XingGuang

Packaging: BOX

Diameter of caster : 150MM Width of caster : 51MM Bearer : 410-450KG Bearing : Double-row Ball Bearing and Double Ball Bearing Height of caster : 191MM Turning radius : 125MM

Send Inquiry Click for details

Heavy Duty PP Caster Full Brake

Brand: XingGuang

Packaging: BOX

Diameter of caster : 150MM Width of caster : 51MM Bearer : 213-450KG Bearing : Double-row Ball Bearing and Double Ball Bearing Height of caster : 191MM Turning radius : 125MM

Send Inquiry Click for details

Heavy Duty PP Caster Fixed

Brand: XingGuang

Packaging: Box

Diameter of caster : 150MM Width of caster : 51MM Bearer : 410-450KG Bearing : Double-row Ball Bearing and Double Ball Bearing Height of caster : 191MM Turning radius : 125MM

Send Inquiry Click for details

Heavy Duty PP Caster Movable

Brand: XingGuang

Packaging: Box

Diameter of caster : 150MM Width of caster : 51MM Bearer : 410-450KG Bearing : Double-row Ball Bearing and Double Ball Bearing Height of caster : 191MM Turning radius : 125MM

Send Inquiry Click for details

China Heavy-Duty PP Caster Suppliers

Diameter of caster : 150MM

Width of caster : 51MM

Bearer : 410-450KG

Bearing : Double-row Ball Bearing and Double Ball Bearing

Height of caster : 191MM

Turning radius : 125MM

polyethylene
PE, for short, is a thermoplastic resin made from ethylene hydrocarbon polymerization. Industrially, it also includes ethylene and a small amount of α-olefins. Polyethylene is odorless, non-toxic, and feels waxy. With excellent low temperature resistance (minimum temperature up to -70 to -100 degrees C), good chemical stability, can withstand most acid-base erosion (not resistant to oxidizing acids), insoluble in general solvents at room temperature, low water absorption, excellent electrical insulation performance; The properties of polyethylene vary by variety and mainly depend on molecular structure and density. Products of different densities (0.91 to 0.96g/cm3) can be obtained using different production methods. Polyethylene can be processed using the molding method of general thermoplastics. It is widely used in the manufacture of films, containers, pipes, single wire, wire and cable, daily necessities, etc., and can be used as high-frequency insulation materials such as televisions and radars. With the development of petrochemicals, polyethylene production has developed rapidly, accounting for about 1/4 of the total output of plastics.